Follow ASUS Firmware Restoration instructions: (use lan1 port, switch off, hold reset button, switch on still holding reset button, wait for system LED to slow blink (cca 20sec), release reset button, flash firmware via ASUS Firmware Restoration tool. To reset the ASUS RT-N12 D1 to its default settings, you have to do the following steps: Put router into operation Press Reset button for at least 6 seconds Restart of the device is automatically executed Default settings have been restored.
Here you can find the default IP address and the username and password for the user interface of the ASUS RT-N12 D1 Wireless-N300 3-in-1 router. This site also contains information about the preconfigured Wi-Fi settings of the device. In the bottom part of this website, you will find a manual for accessing the user interface of this router and resetting its factory settings.
Login data for the user interface
Preconfigured Wi-Fi settings
Access to the user interface
Accessing the user interface is necessary when you want to change the router configuration. For the ASUS RT-N12 D1, you have to do the following steps for access:
- Put router into operation
- Connect the device via Wi-Fi* or a network cable with the router
- Open web browser
- Enter IP address in the address bar and confirm with ‘Enter’ key
- Enter username and password in the open interface and confirm once more
* Make sure that your router’s Wi-Fi is activated.
Reset default settings
Resetting default settings is especially helpful when you have changed and forgotten the login data for the user interface. Please consider that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.
Execute hardware reset
To reset the ASUS RT-N12 D1 to its default settings, you have to do the following steps:
- Put router into operation
- Press Reset button for at least 6 seconds
- Restart of the device is automatically executed
- Default settings have been restored
Execute software reset
Asus Rt N12 Setup Installation
With the ASUS RT-N12 D1, you can restore the factory settings with the installed software. Log in to the user interface of the router with your access data and execute the steps that are described in the user handbook.
Asus Rt N12 Setup Guide
After you have successfully executed the steps mentioned above, the configuration of the router will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.